cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Progress report #2

I locked the other thread. There is some good stuff in there that probably has been reposted in other threads. I'll check. In the meantime, here's another place to write. B-)
Message 1 of 771
latest reply
770 REPLIES 770

Progress report #2

got my benchwork hung on recroom wall.   I would love to use the bench for new mexico canyon mainline, but i need a staging yard  with the mainline.  As nice as it would be having scenic areas, it wouldn't be fun handling cars everytimw you want to run something else.

 

 

can't have industrial switching, staging yard, mainline action and 6-8 feet long trains all in a 9x10 area.

Message 481 of 771
latest reply

Progress report #2

OK guys. You asked for them and they are now posted. Notice in the first pic that there is indeed one lady seated on the porch with a Santa hat and some other decorative hangings......;-)

 

In picture two you can see the drunks and even what they come there for......a Christmas goose!!!! :^O

 

You all do know that you can click on the pictures to enlarge them if you so desire. A little magnifying glass will appear and you can enlarge it again to get even closer....perverts! ]:)

 

Merry Christmas to all.

 

Ms Kimmers and the Grinch

-- Edited by mskimmers2 at 12/11/2011 5:59 AM PST

 

very interesting, can you get them in N scale?

 

MERRY CHRISTMAS to you too, and all your little floozies.

 

]:)

-- Edited by barrysfp45 at 12/11/2011 3:01 PM PST
Message 482 of 771
latest reply

Progress report #2

I hope you've got a doctor's office nearby to treat all the diseases everyone gets from that...

Charles

 

PS, that's bad though with the current slang of "Ho" for the occupants...

Message 483 of 771
latest reply

Progress report #2

Don't know if they are available in N. The HO Hos (does that make them Ho, Ho, Hos? Notice how I interjected that Christmas theme?) are from Merten and Priser. ]:)

 

I would check out Micro-Mark for them. Walthers too of course.

 

I noticed that my On30 Heisler should be released by Bachmann soon. Can't wait!!!! It is a late Christmas present for myself from Santa.......

😄

Message 484 of 771
latest reply

Progress report #2

Either I got a present for myself or I'm bad and will be getting a lump of coal.  Last night I bought an Athearn F59PHI New Mexico DOT Railrunner loco (with DCC/Tsunami sound).  Just need the 3 pack of Bombardier coaches.

Message 485 of 771
latest reply

Progress report #2

I love Tsnuami sound! Most of my locos have it thanks to Bachmann. Call your loco a Christmas present. Now you need a New Years's present.......that new NCE system. Spending money is so much fun!!!!

 

:^O

Message 486 of 771
latest reply

Progress report #2

I haven't bought anything train for quite a while, I did get a couple 1/18 scale trucks and a few spare parts in 1/18, then there is the house of kolor candy paints that are safely stored in the train room, I have been running a few trains and finishing a couple of projects,(GP60M and GP60B) I saw recently that FVM was supposed to release GP60Ms but haven't seen any on the bay, maybe delayed again, there was all talk this time last year and nothing, keep on training and of course spending, I am.

 

]:)

Message 487 of 771
latest reply

Progress report #2

I bought my new years present too Pete. I found on N scale Supply, the last set of 3-pack Bombardier coaches in NMDOT Railrunner scheme. 😄   

 

 

Still looking/thinking about new DCC. Haven't heard from LHS yet about using my hours for a system and whether or not he'll order NCE in just for me.

Saw a couple PH Pro 5 systems on bay for good price, a lot cheaper than Tony's, walthers, and NCE direct.  Seller must have a LHS as he had a lot of NCE stuff listed and I think I may have bought from him before.

 

 

I would think your boss would "special order" the NCE for you from Walthers. Doesn't he do that for other customers?

?:|

-- Edited by ginzokid at 12/15/2011 4:00 AM PST
Message 488 of 771
latest reply

Progress report #2

TIP:   When laying track this is going thru a wall, make sure the wall is hollow first.  I had to pull up my mainline and shift it over  scale 10 as when I was cutting the hole, the drill bit was catching on edge of stud.  ?:|   ( I didn't think I was that close to the other wall.

I'll take some pics today as I need to get other photos..I need to get my Canada series MTL set listed for auction.

 

 

----

I guess that is better than electrics or water!  I wonder how offten the prototype runs into something crazy when digging a tunnel.. Charles

----

-- Edited by taz-of-boyds at 12/23/2011 8:48 AM PST
Message 489 of 771
latest reply

Progress report #2

I once ran into an electric cable in the wall. Good thing I wasn't drilling it out then. Can you say electrocution? Yipes!

:^O

 

 

At least ya wouldn't need to run catenaries for your electric passenger trains..    😮

-- Edited by dl85vette at 12/24/2011 8:10 PM PST
Message 490 of 771
latest reply

Progress report #2

I have made an early New Year's resolution. I have decide to concentrate on finishing all the 7 remaining  HO structure kits and 8 Jordan automobile kits for the Christmas tree layout in the coming months. That way I can then concentrate on doing some scenery for the On30 layout. I have been sitting on my donkey for far too long!

 

B-)

Message 491 of 771
latest reply

Progress report #2

I have drawn up Narrows Park B10 Residence building:

 

SketchUp
http://sketchup.google.com/3dwarehouse/details?mid=5b9532179e2cd7099f9ce57de08f62e5

 

more stills:

https://skydrive.live.com/redir.aspx?cid=e11b13ec6107fb9b&resid=E11B13EC6107FB9B!809&parid=E11B13EC6...

 

I made this up from the Sanborn Map plan view and made it pretty colors....

 

All the best,

Charles

Message 492 of 771
latest reply

Progress report #2

Posted a couple pics so show the benchwork in recroom.  There will be a fascia on edge of layout. (probably painted gray to match room's walls)

 

Currently laying cork/track on parts of recroom, still have a 40" length to fabricate and elevate, cut a hole in wall.

Message 493 of 771
latest reply

Progress report #2

 

So is that a through yard or dead end?  Will you punch another hole in the wall at the far end?

?:|

 

Unfort due to 1.5 % grade, it will be a stub ended yard.

Mainline will go thru a hole at far end. I'll take another pic as I got section of the incline completed and track laid.

-- Edited by dl85vette at 01/01/2012 7:05 AM PST
Message 494 of 771
latest reply

Progress report #2

Looks like good progress to me, interesting arrangement around the walls, pillars and stuff!

Charles

Message 495 of 771
latest reply