04-28-2015 06:32 AM
04-28-2015 07:35 PM - edited 04-28-2015 07:36 PM
Definitely not turquoise or labradorite or chrysocolla. Are you sure it's a gemstone? What is the weight? Could be a veneer -- I'm stumped.
04-29-2015 06:28 AM
04-29-2015 06:32 AM
There are thin segments arranged in triangle shape patterns. The box weights approx 2 lbs.
Also has a polished look. Very cold to the touch and doesn't warm up fast.
I am thinking chrysocolla.
04-29-2015 11:01 AM
This a section of chrysocolla table top. Notice that there is no crazing (all the little cracks) on the surface as there is on yours. All the tiles are 1/16 inch.
With all that I see in the photos I would lean more to a ceramic or thermoplastic. The crazing is a dead give away.
04-29-2015 11:13 AM
I had just come back to read this thread and as I was reading, the new post came up.
I was going to reply that I really do not think that this is gemstone at all -- because of that crazing that the other responder mentioned. The only gemstone that I know that crazes like that is Fire Agate, and no way this is Fire Agate (I was surfing for info on crazing when the other post came in).
This is not the sort of item that would be created with gemstones because the cost and weight would be prohibitive for mass production (would be way heavier than 2#). I really feel this is a veneer put over a thermoplastic material.
It's very pretty, though! You could refer to it with something like faux gemstone veneer or finish for a beautiful natural look.
04-29-2015 11:17 AM
seancarpenter: Thanks for the thermoplastic term -- was trying to think of a term to use, was thinking a thick plastic resin. Beautiful table, gorgeous craftsmanship!
I had a friend up on the NV/OR border that did a table with material from that region (lots of petrified and opalized woods, agates, mineral ores, some dino bone, etc). It was more a "crafty" table than a piece of art, but I always loved it.
04-29-2015 01:34 PM
Everyone is saying crazing like in ceramics and pottery glazes. I am very
familiar with crazing. This is not crazing. I guess its more like a mozaic
of small pieces arranged in a triangle. Its to cold to be thermoplastic. The thin
segments are approx. 1/16" of a inch thick. The coloring goes through the
segment and changes color looking down the side from the side with
a flashlight. The cracks go all the way through you can see them from the side.
Looks almost like it was shattered somehow before the segments were put down.
The top square hole was carved in the box it is not to shapely.
Thanks for all your input !!!!
04-29-2015 01:55 PM
Here is a link to a tissue box plaec that gas the look ! They
say it jade. It also has the textured segment look.
Here is the link !
http://www.zincdoor.com/p/Pigeon-and-Poodle-Palm-Beach-Jade-Tissue-Box-Cover__PPD173.aspx
04-29-2015 01:57 PM
05-01-2015 04:37 PM
The first photo is a crop from your photos; As you van see the seams do not line up well and there is a lot of white showing.
Now this second cropped photo is from the pigeon & poodle tissue box. Notice the tight seams and all over color.
And Emeral shell is a dyed manmade stone resin.
06-26-2015 03:05 AM
A very interesting problem you have there. The China market has many materials that are used that don't necessarily have to be stone. Ceramic and plastic of differing grades and hardness. I would say let the price of the item be a better indicator of what it may be. It's a tissue holder basic asking price around $10-20 for the most fabulous variety. If it were made out of something really good it would be much more expensive.
06-26-2015 09:28 AM - edited 06-26-2015 09:31 AM
Labradorite would have iridescence (aka, "labradorescence") that shifts as you turn it under the light. If no iridescence, it may be lapis (look for small bits of silvery or gold pyrite), sodalite, or a chrysocolla+azurite+other copper mineral mix, or dyed shell as mentioned. I have seen similar mosaic slabs in sodalite and other materials for use on walls and tabletops. Attractive box!