cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

DEI 451M relay

Hi, I have a question concerning the DEI 451M relay. I will be using it on my 93 Mercury Sable. I have reversed polarity door lock/unlock. I am installing a Scytek A20 car alarm. I bought the DEI 451M relay and the 12 volt contant has a 15 amp fuse. I read that a 20 amp fuse must be used for my door lock/unlock type C. I am concerned that it will blow the 15 amp fuse. And I'm concerned that the 20 amp might not blow as it should. Any suggestions?

Message 1 of 3
latest reply
2 REPLIES 2

DEI 451M relay

Anonymous
Not applicable
The additional relays do not change the current draw of your existing door lock system if you are concerned just swap the 20 out for a 15 amp fuse and you will be good to go.
Message 2 of 3
latest reply

DEI 451M relay

Ok,  I thank you for your help.

Message 3 of 3
latest reply