Cubic Pricing
Can someone explain this one.
13 X 13 X 10 = 1690 cubic inches so it is under a full cubic of 1728.
The price is $10.67
12.5 X 12.5 X 10.75 = 1679 cubic inches and is a little smaller the the first measurement but the prices jumps to by $6.30 to $16.97
Even if I take the measurements to a full cubic foot of 12 X 12 X 12 the price is only the $10.67
Pirate Ship shows the same results
stephenmorgan
13 comments
rfmtm
For those unfamiliar with the details of Cubic Rate and why fractional dimensions are important to get the best discounts by staying in the lowest .1 cubic foot rate tier, here are the rules from USPS:
Cubic Rate for boxes (no roles or tubes) are calculated as follows:
Cubic Box OD = L" x W" x H" / 1728 Round Down all dimensions to lowest quarter inch before calculation, then Round Up the result to the next .1 cubic foot.
Cubic Max OD = 0.5cu ft for Priority Mail and 1cu ft for Ground Advantage
Cubic Max Weight = 20#
Cubic Max Length = 18"L
Cubic Rate for envelopes is calculated differently:
Cubic Softpack Tier 0.1 - Length plus Width measures more than 00" up to 21"
Cubic Softpack Tier 0.2 - Length plus Width measures more than 21" up to 27"
Cubic Softpack Tier 0.3 - Length plus Width measures more than 27" up to 31"
Cubic Softpack Tier 0.4 - Length plus Width measures more than 31" up to 34"
Cubic Softpack Tier 0.5 - Length plus Width measures more than 34" up to 36"
krazzykats
I thought the post office rounded dimensions up. 10.75" is priced at 11.0", 10.50" is priced at 11.0", etc...and no dimensions are rounded down??? If it was over, round up...
ᓚá˜á—¢
stephenmorgan
OPI think maybe you are correct but do they round to the nearest inch up or down? I do see how rounding would account for more cubic inches.
12.5 X 12.5 X 10.75 would round up to 13 X 13 X 11 and that is just over over a cubic foot at 1859 cubic inches.
12.5 X 12.45 X 10.75 would round to 13 X 12 X 11 and that is just under a cubic foot at 1716 cubic inches.
The box I use is marked at 12 X 12 X 10.
The outside of the box actually measures 12 3/8 X 12 3/8 X 10 5/8 so I rounded it to 12.5 x 12.5 X 10.75 and was getting the increased cost.
I purchased a label for 12.5 X 12.45 X 11.75 so I should be ok with no fees added later, I hope.
I had use three of these boxes during January and put the size as stated on the box without measuring. So far I have not received any fee adjustments.
stephenmorgan
OPI found this
So you are correct. Thanks!
wastingtime101
No, that's not correct @krazzykats .
For regular rates, dimensions are rounded off to the nearest half inch.
For cubic rates, dimensions are rounded down to the nearest quarter inch.
https://pe.usps.com/cpim/ftp/manuals/dmm300/full/mailingstandards.pdf#page=627
d. Cubic prices are based on the zone and cubic measurement (Tier) of the mailpiece with any fraction of a measurement rounded down to the nearest 1/4 inch. For example, if a dimension of a cubic piece measures 12-3/8 inches, it is rounded down to 12-1/4 inches.
I don't have time to dig in to your specific example today to see what's going on @stephenmorgan , at first glance that rate looks off, but I'll see if I can get to it this week and get back to you.
krazzykats
I've only played with whole numbers on shipping. Wonder if there is any savings. I use the largest possible dimensions, usually 12 or 13", something like that.
I rarely use exact dimensions as a 12 oz. 8x6x4 box ships for the same cost as a 8x8x8 or 12x12x12 box, so I will use the largest dimensions it can ship for at same cost.
But I'm going to now play with .25", .50" and .75" to see if there are any significant savings or will it be the same cost?
Thank You!
ᓚá˜á—¢
wastingtime101
You won't see any difference if all your packages are under a pound where cubic rates don't apply @krazzykats . You're more likely to see a difference 3lb and up.
stephenmorgan
OPFor bigger boxes I measure by rounding up to the nearest 1/8 inch and let the shipping calculator determine the rate. With small boxes sometimes the measurement may push to price to the next cubic, but this is minimum on small boxes. With a box at max cubic size the price goes up considerable if you exceed 1728.
Box advertisements tend to be for the internal measurements. I try to keep just below the max size such as instead of 12 X 12 X 12 I ordered 12 X 12 X 10 boxes. It is not a exacting process how boxes are made and I have found that the outside measurements can vary by 1/8 to 3/4 of an inch.
Sometimes before I assemble a box I will split the box and reassemble (Frankenstein it) to keep below the 1728.
.125 .25 .375 .50 .625 .75 .875
1/8" 1/4" 3/8" 1/2" 5/8" 3/4" 5/8"
stephenmorgan
OPOn eBay or Pirate Ship if I reduce the size from
12.50 X 12.50 X 10.75
to
12.50 X 12.45 X 10.75
Then I get the price of $10.67
However on Pirate Ship the classification of Ground Advantage Cubic is changed to Ground Advantage.
USPS Shows the same Retail price with their Click-N-Ship discount a little higher than eBay and Pirate Ship.
participatrophy
What happens if you try it with 10.7 instead of 10.75?
stephenmorgan
OPI get the higher price also with 10.7
participatrophy
Girth maybe? 13.5 x 11.5 x 10.75 what does it do there?
stephenmorgan
OPSame price,
I can put 13 X 13 X 10, 1690 Cubic Inches, and the price is $10.67
I don't see much information about the Cubic Pricing except for Priority Cubic it needs to be half a cubic foot or smaller and 20 pounds or less. For Ground Advantage Cubic it needs to be a cubic foot or less and 20 pounds or less. Only size limitation I saw said length could not be over 16 inches.