Locked
Discussions in this board are limited to the original poster and Community Mentors
Installation issues with Cab Roof Lights
Issue with installation of "07-13 SILVERADO/SIERRA 3PCS SMOKED HOUSING YELLOW LED CAB ROOF RUNNING LIGHT"
After connecting light wires manually {did not use connectors, since my truck did not have them] by splicing, cutting, soldering with heat tubes and tape, none of the lights illuminated. Connected the Red wire to the Red wire and Black to Yellow on the center light, then the 2 black to black wires for the 2 mini lights. [both of the side lights had the same color black wires, so didn't know which would go to the truck wire Red and Black].
Couldn't find any Fuse for these lights, as that was my first thing to check. May try swapping the mini light wires. But not sure, since the middle light appears to be wired correctly and it should work, but doesn't. Any guidance or suggestions with installation or documentation is appreciated.
mr_lincoln
Mentor2 years ago@dmctek66
Did you try them with the vehicle actually turned on???
There should be a wring diagram whether the contacts go through a connector or not, the connector is just a continuation of the wires the lights need to be connected to.
Try googling a YouTube video of installing those lights on your vehicle type.